Ice Racing Products

Bulldozer Racing

Search other products:

ISR LEGAL LENGTH PUSH THROUGH
ICE STUDS FOR KITTY CATS.

CUSTOM DESIGNED AND RACE TESTED. MANUFACTURED SPECIFICALLY
FOR THE SOUCY AND OLD STYLE FLAT TRACKS.

CNC MACHINED FROM 4140 HEAT TREATED STEEL FOR HIGH STRENGTH,
SUPERIOR TRACTION AND LONG WEAR. PUSH THROUGH DESIGN.

THREADED BILLET BACKER PLATES.

CUSTOM DESIGNED AND CNC MACHINED FROM 6061-T6 ALUMINUM FOR
THE ULTIMATE IN STRENGTH AND WEIGHT SAVINGS.

LOW PROFILE FOR MAXIMUM LUG CLEARANCE AND STUD PENETRATION.

PART NUMBER           DESCRIPTION                            PRICE
CR-Flat Track         1/4” Push Thru Stud                     $2.50ea.
CR-Soucy Track    1/4” Push Thru Stud                     $2.50ea.
CR-Backer              1/4--20 Billet Backer                     $2.50ea.
CR-Spanner         Installation Wrench Driver           $10.00ea.

OVAL, LEMANS, DRAG, SPEED RUN &
WATERCROSS (NOT FOR SNO-CROSS)

EXCLUSIVELY DESIGNED, BUILT AND TESTED ON THE
ORIGINAL BULLDOZER CHAMP SLEDS. THESE REAR
SUSPENSIONS ARE CUSTOM BUILT FROM THE LIGHTEST AND
STRONGEST MATERIALS AVAILABLE. SIDE RAILS ARE
MACHINED FROM 6061-T6 BILLET ALUMINUM (NOT
EXTRUDED AND STAMPED).FRONT ARM AND REAR SCISSORS
BUILT FROM 4130 CHROMOLY TUBING. FULLY ADJUSTABLE.
EQUIPPED WITH SINGLE FOX FLOAT R REAR SHOCK.

SLIDE LUBE AVAILABLE UPON REQUEST.

PRODUCT DESCRIPTION PRICE
CR-Rear Skid/Ice Bulldozer Ice Rear Suspension $1050.00

TRACTION

REAR SUSPENSION

120 TRACK DRIVERS

6 TOOTH INVOLUTE AND 6 & 7 TOOTH
CONVOLUTE

ONE PIECE DESIGN. CNC MACHINED FROM
(SUPER SLIPPERY) SOLID ACETAL/ DERIN ROUND BAR. THESE
DRIVERS FEATURE AN INTEGRATED DESIGN USING TWO
INTERNAL IDLER STYLE WHEELS.

THESE DRIVER WHEELS ARE “HANDS DOWN” THE EASIEST
ROLLING 120 TRACK DRIVE WHEELS AVAILABLE. MACHINED
FOR ¾” ROUND DRIVE SHAFT.

ARCTIC CAT TRACK DRIVERS CURRENTLY IN STOCK.
POLARIS TRACK DRIVERS AVAILABLE SOON.

PART NUMBER                    DESCRIPTION                     PRICE
CR-6 Tooth –Inv.      6 Tooth Involute Driver            $175.00ea.
CR-6 Tooth – Con    6 Tooth Convolute Driver        $270.00ea.
CR-7 Tooth –Con     7 Tooth Convolute Driver        $275.00ea.

RACE CHASSIS

From parts to a partial roller or a
complete turn-key oval, lemans, drag,
speed run, or WaterCross race sled can
be built to your order!

We can use your power or one from our
house engine supplier "Recreational
Motorsports."

ISR-legal 120 Champ and Open Champ
versions available with a list of options.
OEM or custom hoods and windshields
also available.

For details, specifications, and pricing,
please inquire.

DRIVE LINE

GATES POLYCHAIN SPROCKETS,
TENSIONERS, AND BELTS

Tired of breaking chains?

Sick of the greasy, oily mess that they make?

Race-proven strength, superior efficiency, and extreme
durability are just a few of the advantages of the this
system.

CNC MACHINED 6061-T6 BILLET ALUMINUM SPROCKETS
AND IDLER PULLEYS AVAILABLE IN A VARIETY OF RATIOS.
DESIGNED TO GIVE YOU THE SAFEST, STRONGEST,
SMOOTHEST, MOST EFFICIENT FINAL DRIVE SET UP
AVAILABLE.

ALL SPROCKETS AND PULLEYS COME WITH 3/4” BORE
WITH 3/16” KEYWAY.

GATES BELTS AVAILABLE IN TEN TOOTH INCREMENTS.

PART NUMBER                      DESCRIPTION                                     PRICE
CR-18 TOOTH                     18 Tooth Cog Belt Sprocket               $75.00ea.
CR-19 TOOTH                     19 Tooth Cog Belt Sprocket               $75.00ea.
CR-20 TOOTH                     20 Tooth Cog Bet Sprocket                $75.00ea.
CR-21 TOOTH                     21 Tooth Cog Belt Sprocket               $75.00ea.
CR-22 TOOTH                     22 Tooth Cog Belt Sprocket               $75.00ea.
CR-23 TOOTH                     23 Tooth Cog Belt Sprocket               $75.00ea.
CR-24 TOOTH                     24 Tooth Cog Belt Sprocket               $75.00ea.
CR-45 TOOTH                     45 Tooth Cog Belt sprocket               $100.00ea.
CR-46 TOOTH                     46 Tooth Cog Belt Sprocket               $100.00ea.
CR-47 TOOTH                     47 Tooth Cog Belt sprocket               $100.00ea.
CR-48 TOOTH                     48 Tooth Cog Belt Sprocket               $100.00ea.
CR-63 TOOTH                     63 Tooth Cog Belt Sprocket               $100.00ea.
CR- TENSIONER                 Bulldozer Belt Tensioner                     $225.00ea.
CR-GATES-70                     70 Tooth Drive Belt                                $50.00ea.
CR-GATES-80                     80 Tooth Drive Belt                                $50.00ea.
CR-GATES-90                     90 Tooth Drive Belt                                $50.00ea.

120 TRACK DRIVERS

BILLET ALUMINUM
BEARING LOCK COLLARS

DECREASE YOUR ROTATING MASS BY REPLACING YOUR HEAVY STEEL
LOCKING COLLARS WITH ANODIZED BILLET ALUMINUM UNITS.

AVAILABLE IN SIZES TO FIT 5/8” AND 3/4” SHAFTS

PART NUMBER       DESCRIPTION                   PRICE
CR-112905      5/8” Billet Locking Collar      $15.00ea.
CR-112805      3/4” Billet Locking Collar      $15.00ea.

CLUTCHING

Torlon Roller Kits-
For J.R. Race Car Secondary Clutches

PROBLEM: TAKE A LOOK AT YOUR USED HELIXES. DO YOU
NOTICE THE ABRASIVE WEAR PATTERN LEFT BY THE OEM
STEEL RACE ROLLER BEARING? IT`S A PROVEN FACT THAT THE
HIGHER THE HORSEPOWER OF YOUR ENGINE PACKAGE THE
HARDER THE PULL ON YOUR SECONDARY AND THE DEEPER
THE WEAR PATTERN BECOMES. THESE ABRASIVE MARKS ARE
TELLING US SOMETHING.

1. STEEL ON ALUMINUM DOESN'T WORK.
2. WORN AND GROOVED HELIXES LOSE THEIR SHIFTING ANGLE
AND EFFICIENCY.

WE NEED A FIX!

COMPOUND ANGLE DRIVEN CAMS –
J.R. RACE CAR SECONDARY CLUTCHES

CAD DESIGNED AND CNC MACHINED FROM BILLET 6061-T6 ALUMINUM.
OUR NEW DESIGN IS LIGHTER THAN THE OEM CAM AND FEATURE A NEW
STYLE BUSHING RETAINER.

OUR COMPOUND ANGLE HELIXES ARE AVAILABLE IN A VERIETY OF
COMBINATONS TO HELP YOU “FINE TUNE” ANY APPLICATION. FITS ALL
JR. RACE CAR REVERSE CAM DRIVEN CLUTCHES.

PART NUMBER           DESCRIPTION                                       PRICE
CR-44/34              44/34 Compound Helix                          $50.00ea.
CR-44/36              44/36 Compound Helix                          $50.00ea.
CR-44/38              44/38 Compound Helix                          $50.00ea.
CR-44/40              44/40 Compound Helix                          $50.00ea.
CR-46/36              46/36 Compound Helix                          $50.00ea.
CR-46/38              46/38 Compound Helix                          $50.00ea.
CR-46/40              46/40 Compound Helix                          $50.00ea.
CR-46/42              46/42Compound Helix                           $50.00ea.
CR-48/38              48/38 Compound Helix                          $50.00ea.
CR-48/40              48/40 Compound Helix                          $50.00ea.
CR-48/42              48/42 Compound Helix                          $50.00ea.
CR-48/44              48/44 Compound Helix                          $50.00ea.

SOLUTION: I HAVE DESIGNED AND TESTED A HIGH END POLYMER MATERIAL TO USE AS AN UPDATED REPLACEMENT ROLLER.
THIS MATERIAL IS VERY RESILIENT TO HIGH LOAD WEAR AND IS EXTREMELY SMOOTH AND SLIPPERY. THESE ROLLER KITS
ARE SUPPLIED WITH THEIR OWN CUSTOM FASTENERS. ALL COMPONENTS ARE CNC MACHINED AND ARE A DIRECT BOLT UP
REPLACEMENT FOR THE OEM ROLLERS USING JUST BASIC HAND TOOLS.

EXPERIENCE HARDER ACCELERATION, SMOOTHER UPSHIFTS AND BACKSHIFTS WITH LESS DRIVELINE CHATTER, AND SAVE
ON ALL THE WEAR ON YOUR EXPENSIVE HELIXES.

PART NUMBER DESCRIPTION PRICE
CR-Roller Kit Torlon Roller Kit / Driven Clutch $47.95ea.

BRAKES
(COMING SOON)

FORMABLE BRAKE HANDLES

CNC MACHINED FROM FORMABLE 2025-T5 ALUMINUM. DESIGNED AS AN EXACT BOLT UP
REPLACEMENT FOR THE OEM “HAYES 9” STYLE HYDRAULIC BRAKE HANDLES.

A MUST FOR ALL HOOKED RACE HANDLEBARS.

PART NUMBER DESCRIPTION PRICE
CR-Lever Formable Brake Handle Call for pricing!

FIBERGLASS
COMPONENTS

Ice Racing

Throttle Cables

Custom-built throttle cables that are a direct fit to the
18mm Mikuni carb and OEM Kitty throttle blocks.
CR-18 Cable..................................................................$54.00

LIGHTWEIGHT HOODS, WINDSHIELDS, FIBERGLASS OEM REPLACEMENT BUBBLE
WINDSHIELDS, AND CUSTOM ENCLOSURES AND BODY PARTS.

CALL FOR PRICING.

Billet Intake Manifolds

F-3 and F-1 Kitty Cat 18 mm Mikuni Billet Intake
Manifolds

CNC Machined from 6061-T6 aluminum.
This new design features an O-Ring sealing surface
that eliminates the OEM paper gaskets.
Direct bolt up application for the 18mm Mikuni round
slide carbs.

CR-18mm-Man.............................................................$35.00

CARBURATION

FINAL DRIVE